Belay & Descending Devices
 |
2101 - Black Diamond ATC {our best seller} This super versatile and light-weight ATC is a slightly refined classic design made to beef up the cable to the attachment, eliminating chance of it being sucked into the rope during use. Super smooth feel and won't kink your rope during rappels. | |
|
click on picture for larger image |
Cost: $16.95 |
|
 |
2102 - Black Diamond ATC - XP Innovative design offers 2 mode of use for high friction or low-friction situations. Deep, cleated V-grooves give superb friction even in wet or icy conditions. Black Diamond gel logos provide insulation to your fingers from those heated rappels. |
|
| click on picture for larger image |
Cost: $19.95 |
|
 |
2103 - Black Diamond ATC - Guide This device will do it all. The Guide is by far the most versatile belay device on the market. With three functions; regular belay, high friction belay, and for guide/lowering, this device is a must. |
|
| click on picture for larger image |
Cost: $29.95 |
|
 |
2104 - Black Diamond ATC - Sport Single rope sport belay device. Built using the ATC's time tested design. Accommodates ropes from 7.7 to 11 mm. |
|
| click on picture for larger image |
Cost: $17.95 |
|
 |
2105 - Petzl Reverso 4 - NEW This multi-purpose belay/rappel device is ultra-light (59 g, 25 % lighter than the REVERSO 3) and intuitive to use. V-shaped friction channels with asymmetrical lateral grooves adapt the friction to the type of rope for better control (ARC technology: braking control for twin, half and single dynamic ropes). Reverso mode for belaying one or two seconds with assisted braking. |
|
| click on picture for larger image |
Cost: $34.95 |
|
 |
2106 - Petzl Verso The VERSO is Petzl's lightest belay/rappel device. It offers a light and compact option for climbers looking to further reduce the weight/size of their rack of gear. The asymmetrical V-shaped grooved friction channels adapt the friction for better control using ARC (Adaptive Rope Control) technology. They decrease friction when taking in slack for greater ease of use. |
|
| click on picture for larger image |
Cost: $25.95 |
|
 |
2107 - CMI Standard Figure 8 The rappelling "tradition"! Light weight, strong and made for getting you down from those "scary" places. |
|
| click on picture for larger image |
Cost: $15.95 |
|
 |
2108 - Petzl Huit Square shaped figure 8 descender to reduce twisting of the ropes. Compact and lightweight. |
|
| click on picture for larger image |
Cost: $17.95 |
|
 |
2109 - CMI's Rescue 8 w/ Ears CMI is known for their product testing and quality. Big with extra holes for extra clips. |
|
| click on picture for larger image |
Cost: $31.95 |
|
 |
2110 - Kong Big Stainless Steel Rescue 8 w/ Ears In high angle work and rescue, you need an 8 that you can tie off quickly and easily. The Kong Rescue 8 is a great mix of strength, weight and performance. Weight: 750 grams Strength: 50kN
|
|
| click on picture for larger image |
Cost: $69.95 |
|
 |
2111 - Petzl Gri Gri - LIMITED QUANTITIES AVAILABLE! The gri gri is an automatically locking belay device which works somewhat like an automobile seat belt in that the rope runs freely through the device when movements are slow, but locks when there is a shock load. Braking is done by the belayer's brake hand on the free end of the rope. Helpful when the participant is heavier than the belayer or on elements such as a belayed team wall.
|
|
click on picture for larger image |
Cost: $89.95 |
|
 |
2111a - Petzl Gri Gri 2 The GRIGRI 2 belay device with assisted braking is designed to facilitate belay maneuvers. The GRIGRI 2 works equally well for lead climbing and top roping. It may be used on all single dynamic 8.9 to 11 mm ropes on the market (ideal at 9.4 mm to 10.3 mm). Both compact and ultra-light, the GRIGRI 2 will accompany you on climbs around the world for many years. The GRIGRI 2 has a new design that allows excellent control during the descent.
|
|
| click on picture for larger image |
Cost: $94.95 |
|
 |
2115 - RSI Steel Cable Grab with Screw Locking Twisted D Carabiner The Cable Grab is designed to keep facilitators secure while setting up and taking down equipment. This grab releases for easy down-climbing and will catch with a big fall. No need to hold the device upright as you climb. Comes with a Twisted D carabiner {pictured here} for easy connection to your facilitator harness. Exceeds all applicable OSHA/ANSI regulations.
|
|
Cost: $224.95 |
|
|
 |
2116 - Niagara C-300 3/8" Cable Grab with N250G Steel Twistlock Carabiner The Cable Grab is designed to keep facilitators secure while setting up and taking down equipment. This grab releases for easy down-climbing and will catch with a big fall. No need to hold the device upright as you climb. Comes with Niagara's N250G Steel Twistlock Carabiner.
|
|
click on picture for larger image |
Cost: $125.00 |
|
 |
2117, 2118, 2119 - Perfect Descent 220 Autobelay - without carabiner CLIP & CLIMB! Made in the USA with quality precession, the new mechanical 220 auto belay system is extremely safe with a double redundant braking system allowing smooth descents. The unit can accommodate a variety of walls up to 28 feet, 40 feet, or 52 feet high indoors or out. The field replaceable yellow safety lanyard has a built in wear indicator letting you know when it's time to change it out. Inspection and service is required only every 2 years! This unit has the best ROI (Return on Investment) for a belay device on the market. Get yours today!
|
|
click on picture for larger image |
|
|
 |
2117a, 2118a, 2119a - Perfect Descent 220 - Line Replacement Kit {without carabiner} 1" wide Nylon/Spectra Webbing allows in the field replacement of your climbing lanyards. These super strong lanyards have a built in wear indicator that takes the guess work out of deciding if it's time to replace them. These do NOT come with a carabiner allowing you the option to put your favorite carabiner on the end.
|
|
click on picture for larger image |
Cost: $120.00 |
|